3.2.1.3  View

The View menu contains commands to display or delete the objects appearing on the screen or to make visible change (except simulation that belongs to the menu Main menu/Motion):

3.2.1.3.1  ToolBar

This is a menu item to switch on/off visibility of the ToolBar. The short key of this command is F9.

3.2.1.3.2  StatusBar

This is a menu item to switch on/off visibility of the StatusBar. The short key of this command is Shift+F9.

3.2.1.3.3  Vectors/Velocity

This is a menu item to switch on/off visibility of the velocity vector. The short key of this command is F2.

3.2.1.3.4  Vectors/Force

This is a menu item to switch on/off visibility of the force vector. The short key of this command is Shift+F2.

3.2.1.3.5  Names/Body

This is a menu item to switch on/off visibility of the name of the Bodies. The short key of this command is F3.

3.2.1.3.6  Names/Group

This is a menu item to switch on/off visibility of the name of the Groups. The short key of this command is Shift+F3.

3.2.1.3.7  Center of mass

This is a menu item to switch on/off visibility of the Mass center of the Groups. The short key of this command is F4.

3.2.1.3.8  Trail

This is a menu item to switch on/off visibility of the Trail. The short key of this command is Shift+F4.

3.2.1.3.9  Stick

This is a menu item to switch on/off Stick. The short key of this command is F6.

3.2.1.3.10  Info

This is a menu item to switch on/off the information text in the top-left corner of the screen. The short key of this command is Shift+F1.

See further the section On-Screen Information.

3.2.1.3.11  Origo

This is a menu item to switch on/off the big cross of the origo. The short key of this command is Shift+F6.

See further the section Center of the coordinate system.

3.2.1.3.12  View...

This is a menu item to switch on/off the View state.

See further the section Change view.

3.2.1.3.13  Zoom...

This is a menu item to switch on/off the Zoom state.

3.2.1.3.14  Go Center

By the menu item Go Center you can set the origin of the coordinates into the screen center. The short key of this command is Ctrl+E.

See further the section Change view.

3.2.1.3.15  Repaint

The command Repaint will delete and redraw the screen. The short key of this command is F5.

See further the section Refresh.

3.2.1.3.16  Refresh

The command Refresh will redraw the screen. The short key of this command is Shift+F5.

See further the section Refresh.

3.2.1.3.17  Description...

This is a command to switch on/off displaying the dialog window Description. It is described in detail in the section of System description.

3.2.1.3.18  Control Panel...

This is a command to switch on/off displaying the dialog window Control Panel. It is described in detail in the section of Control Panel.